 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Cree(R) 5-mm Round LED Model # LC503UHR-30P-A Data Sheet 30-degree, 5-mm round LED lamp in red color with water-transparent lens and stopper Applications * * * * Advertising Signs Indicators Traffic Lights Automotive Lighting Absolute Maximum Ratings (TA = 25C) Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature Electrostatic Discharge Classification(MIL-STD-883E) Note Symbol IF IFP VR PD Topr Tstg Tsol ESD Absolute Maximum Rating 50 200 5 130 -40 ~ +95 -40 ~ +100 Unit mA mA V mW C C Max. 260C for 3 sec. max. (3 mm from the base of the epoxy bulb) Class 2 Note: Pulse width 0.1 msec, duty 1/10. Typical Electrical & Optical Characteristics (TA = 25C) Characteristics Forward Voltage Reverse Current Dominant Wavelength Luminous Intensity 50% Power Angle 2 Symbol VF IR D Condition IF = 20 VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA A Unit V A nm mcd deg Minimum Typical 2.1 Maximum 2.6 100 618 3000 624 5100 30 630 IV 1/2H-H D-CT038 Data Sheet: CL Subject to change without notice. www.cree.com/ledlamps Standard Bins for LC503UHR-30P-A (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D ) bins shown. Orders for LC503UHR1-30P-A may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength ( D ) values shown and specified are at IF = 20 mA. Luminous Intensity (IV) 8200 mcd Z or above Y 5860 mcd X 4180 mcd W 3000 mcd 618 nm Dominant Wavelength ( D 630 nm ) Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous intensity is 15%. 4. Tolerance of measurement of dominant wavelength is 1 nm. 5. Tolerance of measurement of VF is 0.05 V. 6. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 7. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 8. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely. Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT038.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps Document No. SPE/LC503UHR1-30Q-A Rev. No. 03 Graphs raphs G If (mA) -60 Vr(V) -50 -40 -30 -20 -10 0.0 -10.0 -20.0 -30.0 -40.0 Vf(V) Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. -50.0 100.0 80.0 60.0 40.0 20.0 0.0 1.8 2.0 2.2 2.4 2.6 2.8 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. 5.0 4.0 3.0 2.0 1.0 0.0 0.0 20.0 40.0 60.0 If(mA) 80.0 100.0 Half Power WL=23nm Domi WL= 624nm 100% 75% 50% 25% WL(nm) 500 600 700 800 900 FIG.4 RELATIVE LUMINOUS INTENSITY VS. 0% 400 WAVELENGTH. FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT. 100 80 60 40 20 0 IF(mA) 50% Power Angle : 30 0 Ie(%) 100% 80% 60% 40% Ta( C) 0.0 20.0 40.0 60.0 80.0 100.0 -90 -60 -30 0 30 60 90 20% 0% FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=105 C) FIG.6 FAR FIELD PATTERN Items Prepared by Checked by Approved by Signatures WangFJ WangDW David Date 2007-09-21 2007-09-21 2007-09-21 Rev. No 02 03 Date Revision History Change Description 2007-07-06 Release. IV from V,W,X,Y(typ)4200 to W,X,Y(typ)5100mcd. 2007-09-21 Add ESD rank Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps reserved. FCN# Copyright (c) 2007 Cree, Inc. All rightsof Cree, Inc. information in this document is subject to change without notice. Cree and the FCN20070234 The Cree logo are registered trademarks Data is subject to CLD-CT038.000 change without prior notice; please refer to COTCO Website for the latest version. 3 Copyright@2002 Cotco International Ltd. Mechanical Dimensions Document No. SPE/LC503UHR1-30P-A Rev. unless 01 All dimensions are in mm. Tolerance is 0.25 mm No. otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max. Dimension Drawing te maximum ating 50 200 5 130 ~ + 95 ~ +100 Unit mA mA V mW C C 60C Notes Max. for 3 sec the base of the epoxy bulb) RoHS Compliance Class levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or The II between 10mA and 30mA are recommended. Please contact COTCO recommended drive conditions. Vision Advisory Claim otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. tics ( Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Ta = 25C) Condition IF = 20mA Min. --- Typ. 2.1 Max. 2.6 Unit V Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT038.000 Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV 1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . :special request * Packing type Product P/N 0: Standard = Bulk pack 1~9, A~Z . . . : special request * * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LC503UHR1-30Q-A-00001 Description 5mm Round 30 Red, Full Rank, Bulk Pack * Please contact your Cree representative about the availability of non-standard kits. Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT038.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps |
Price & Availability of LC503UHR1-30P-A-CAA02
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |